KFD2-SLD-Ex1.13100 Pepperl+Fuchs Solenoid Driver

Description

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		19 ... 30 V DC loop powered
Input current		115 mA at 24 V , 130 Ω load
Power dissipation		1.5 W at 24 V , 130 Ω load
Input
Connection side		control side
Connection		channel 1: terminals 7+, 8- , optional R_ext between terminals 7 and 9 channel 2: terminals 10+, 11- , optional R_ext between terminals 10 and 12
Input current		approx. 6 mA at 24 V DC If necessary, the current value can be increased by resistor R_ext.
Signal level		1-signal: 15 ... 30 V DC 0-signal: 0 ... 5 V DC
Output
Connection side		field side
Connection		channel 1: terminals 1+, 2-, 3 channel 2: terminals 4+, 5-, 6-
Internal resistor		approx. 64 Ω
Current		typ. 100 mA
Voltage		≥ 13 V
Current limit		105 mA
Open loop voltage		typ. 19.2 V
Load		nominal 0.08 ... 1 kΩ
Switching frequency		max. 2 Hz
Energized/De-energized delay		30 ms / 30 ms
Line fault detection		signal at short-circuit R_load < 30 Ω, lead breakage R_load > 10 kΩ , test current < 4 mA pulsing (20 ms On, 200 ms Off)
Galvanic isolation
Input/power supply		basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V_eff
Input/input		basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V_eff
Output/Output		basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V_eff
Output/other circuits		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 200 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		EXA 17 ATEX 0076X
	Marking	II 3(1)G Ex ec [ia IIB Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Voltage	22.2 V
	Current	360 mA
	Power	1990 mW
Supply
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Galvanic isolation
	Output/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 60 V
	Output/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
IECEx approval
	IECEx certificate	IECEx EXA 17.0019X
	IECEx marking	Ex ec [ia IIB Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008