KFD2-SH-EX1.T.OP Pepperl+Fuchs Safety Barrier Brand New

Description

General specifications
Signal type		Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL d
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		20 ... 30 V DC
Ripple		≤ 10 %
Rated current		≤ 100 mA
Power dissipation		1.5 W
Power consumption		max. 1.7 W
Input
Connection side		field side
Connection		terminals 4+, 6-
Open circuit voltage/short-circuit current		approx. 8.4 V DC / approx. 11.7 mA
Lead resistance		max. 50 Ω , cable capacitances and inductances must be observed in hazardous areas
Switching point
	Relay de-energized	I < 2.1 mA and I > 5.9 mA , output switched off
	Relay energized	2.8 mA < I < 5.3 mA , output switched on
Response delay		≤ 1 ms
Output
Connection side		control side
Connection		output I: terminals 7+, 8- ; output II: terminals 9, 10 ; output III: terminals 11, 12
Output I		active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 19 V DC at 15 mA ... 31 V DC at no-load fault: 0 V
Output II		relay
	Contact loading	48 V AC/DC 250 mA
	Mechanical life	≤ 20 x 10⁶ switching cycles
Output III		relay , fault signal
	Contact loading	48 V AC/DC 250 mA
	Mechanical life	≤ 20 x 10⁶ switching cycles
Transfer characteristics
Switching frequency
	Output I	≤ 50 Hz
	Output II	≤ 5 Hz
	Output III	≤ 5 Hz
Indicators/settings
Display elements		LEDs
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Machinery Directive
	Directive 2006/42/EC	EN/ISO 13849-1:2015
Conformity
Electromagnetic compatibility		NE 21:2017 , EN 61326-3-2:2008
Degree of protection		IEC 60529:2001
Safety		IEC/EN 61508:2010
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 00 ATEX 2041
	Marking	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC
	Input	Ex ia
	Voltage	9.56 V
	Current	16.8 mA
	Power	41 mW (linear characteristic)
Supply
	Maximum safe voltage	40 V AC/DC (Attention! The rated voltage can be lower.)
Output
	Contact loading	48 V AC/DC 250 mA
	Maximum safe voltage	60 V AC/DC (Attention! The rated voltage can be lower.)
Certificate		TÜV 99 ATEX 1493 X
	Marking	II 3G Ex ec nC IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019
International approvals
IECEx approval
	IECEx certificate	IECEx PTB 21.0010 IECEx TUN 19.0013X
	IECEx marking	[Ex ia Ga] IIC [Ex ia Da] IIIC Ex ec nC IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514